081-7251288 Piviyada / ปิวิยะดา

funke logo

Funke Plate heat exchangers

For more than three decades FUNKE has specialised in the development and manufacture of heat exchangers with up to 2000 m² heat exchanger surface for all current industrial applications and designs.

In the field of Plate Heat Exchangers FUNKE offers a sophisticated range of products able to meet almost any requirement in machine and plant engineering. FUNKE’s special “off-set” system with asymmetrical flow gaps creates highly efficient and cost-effective apparatuses whose performance (depending on design) is up to 17 percent higher compared with conventional plate heat exchangers.

Bolted Design (Plate & Flame)


FUNKE - heat transfer plates are characterised by optimum embossing resulting in high heat transfer coefficients. This permits low-cost and optimum adaption to the respective application conditions Our product range includes single-pass and multi-pass plate heat exchangers with heat exchange surface up to 2000 m².


Technicial Data

  • Technical Data
  • Heat exchange surface per plate: 0,04 - 3 m²
  • Max. design pressure: 25 bar
  • Max. design temperaturer: 195°C

Plate Material

  • standard: stainless steel 1.4301/AISI 304, 1.4401/AISI 316
  • Optionally: 1.4539, 254 SMO, titanium

Brazed Design



Mainly for heating, air-conditioning, motor cooling, heat recovery. Globally to be used with different media.

Technical Data

  • Max. operating pressure: 30bar
  • Max. operating temperature: +200°C



  • Plates: 1.4401 / AISI 316
  • Solder: copper
  • nickel (NPLK)

Design / Function

The plate heat exchanger consists of a package with linked up embossed plates with passage openings. Every second plate is staggered by 180°, creating a flow gap at any given time. All plates are provided with tied up or glued gaskets, which completely seal the various flow gaps from the outside and separate the media involved in heat exchange.

The plate package is mounted in a rack and is pressed between fixed plate and pressure plate by means of clamping bolts. During service life the gaskets of a plate heat exchanger are subject to a normal fatigue process and therefore the plate package can be retightened several times - dependent on conditions of use - until "PP"-min. is reached.

Special materials

Plate materials - depending on application - are chromium nickel steels, chromium nickel molybdenum steels, titanium and further materials.

Gasket materials are

NBR, EPDM, Viton, silicone and special materials

  1. Fixed Plate
  2. Pressure Plate
  3. Support
  4. Carrying Beam
  5. Lower Plate Guide
  6. Carrying Idler
  7. Clamping Bolt
  8. Fixing Bolt
  9. Formed Rubber Parts

© 2015-2019

บริษัท โกลบอล เอ็นจิเนียริ่ง โปรดัก ซัพพลาย จำกัด

Global Engineering Product Supply Co., Ltd.


Future Technology Supply Co., Ltd.



081-7251288 Piviyada / ปิวิยะดา

Nakorn Ratchasima Office (Head Office)

72/1 Soi Mittraphap 19, Mittraphap Road,
Nai Muang Sub-District, Muang District
Nakhon Ratchasima 30000
Tel. +66 44 299 717    Fax. +66 44 299 718
Mobile. +66 81 725 1288

Bangkok Office

135/33 12th Floor, Soi Na Thong (Ratchadapisek 7)
Ratchadaphisek Road, Dindaeng Sub-District
Dindaeng District, Bangkok 10400
Tel. +66 2 274 5214    Fax. +66 2 274 5216
Mobile. +66 81 725 1288